Por favor, use este identificador para citar o enlazar este ítem: http://repositorio.ulvr.edu.ec/handle/44000/3643
Título : Factibilidad técnica y económica comparativa por adherencia, entre los morteros tradicionales y el mejorado con aditivo para edificaciones
Autor : Calero Proaño, Laura de Jesús
Calero Amores, Marcial
Palabras clave : Edificación;Aditivo;Factibilidad;Mortero
metadata.dc.rights: openAccess
metadata.dc.rights.uri: http://creativecommons.org/licenses/by-nc-sa/3.0/ec/
Fecha de publicación : 2019
Editorial : Guayaquil: ULVR, 2019.
metadata.dc.language.iso: spa
Citación : Calero Proaño, L. d., & Calero Amores , M. (2019). Factibilidad técnica y económica comparativa por adherencia, entre los morteros tradicionales y el mejorado con aditivo para edificaciones . Yachana Revista Científica, 8(3), 1-9.
metadata.dc.format.extent: pp. 1-9
Resumen : Las edificaciones tienen como principio seguridad, estabilidad y economía, por tanto, optimizar técnica y económicamente el enlucido de las partes estructurales representa aportar al desarrollo de la ingeniería. La investigación abordó optimizar la factibilidad comparada entre los morteros tradicional y mejorado con aditivos que son utilizados para enlucidos en edificios. Se investigaron tres aditivos que lideran la comercialización en el país. Actualmente los aditivos se comercializan fundamentado en mejorar la resistencia por adherencia del mortero, lo cual, ha sido poco analizado técnica y económicamente respecto al mortero tradicional, además, no existen estudios para determinar indicadores que relacionen la adherencia con la edad del componente estructural. La investigación tiene enfoque experimental y cuantitativo, levantó más de 200 registros. Se prepararon testigos de hormigón tipo viga, a los cuales, en función de la edad se enlucieron y mediante el equipo TESTER se determinó la resistencia por adherencia del mortero aplicado. Se determinó que la resistencia por adherencia del mortero es función directa de la edad de la viga. Valorando la relación por resistencia de adherencia y costos del mortero tradicional con B/C=1, se determinó que la mejor factibilidad comparada es del mortero tipo C con B/C de 1,21, mientras que los tipos A y B presentan costos y adherencias inferiores al tradicional. La investigación científicamente aporta al desarrollo de las edificaciones y genera espacios para nuevas investigaciones que impacten en optimizar la estabilidad y economía del edificio.
Descripción : The buildings have as a principle security, stability and economy, therefore, technically and economically optimizing the plastering of the structural parts represents contributing to the development of engineering. The research aimed to optimize the comparative feasibility between traditional and improved mortars with additives that are used for plastering in buildings. Three additives that lead marketing in the country were investigated. Currently the additives are marketed based on improving the adhesionresistance of the mortar, which has been little analyzed technical and economic compared to traditional mortar, in addition, there are no studies to determine indicators that relate the adherence with the age of the structural component. The research has an experimental and quantitative approach and raised more than 200 records. Beam type concrete witnesses were prepared, to which, depending on the age, they were plastered and the resistance by adhesion of the applied mortar was determined by the TESTER equipment. It was determined that the bond strength of the mortar is a direct function of the beam's age. Valuing the relation by resistance of adhesion and costs of the traditional mortar with B / C = 1, it was determined that the best comparative feasibility is of mortar type C with B / C of 1.21, while types A and B present costs and adhesions inferior to the traditional one. Research scientifically contributes to the development of buildings and generates spaces for new research that impact on optimizing the stability and economy of the building.
URI : http://repositorio.ulvr.edu.ec/handle/44000/3643
ISSN : 2528-8148
Aparece en las Tesis: VOL. 8, NÚM 3 (2019)



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons